df-617_im_A0HU-9560-00E.pdf
(
581 KB
)
Pobierz
DF-617
Reverse Automatic Document Feeder
INSTALLATION MANUAL
Applied Machines: C360/C280/C220
COLOR MFP: 36 ppm/28 ppm/22 ppm
Product Code: A0ED
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded.
(mass: approx. 16.7 kg (36-3/4 lb))
No.
Name
Shape
Q’ty
9.
Chart
1
9J07IXC048DA
10.
Installation
manual
I. Accessory parts
1 set
No.
Name
Shape
Q’ty
1.
Reverse auto-
matic docu-
ment feeder
4980IXC019DA
1
A0HUIXC001DA
2.
Protective
film (right)
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
1
A01HIXC024DB
3.
Protective
film (left)
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
1
A01HIXC025DB
4.
Film
1
A0HUIXC002DA
5.
Label A
1
6.
Label B
1
7.
Shoulder
screw
2
4582U010AA
8.
Mounting
screw
2
4582U011AA
A0HU-9560-00
E-1
II. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Hold the reverse automatic document feeder as
shown in the illustration and remove it from the
carton.
5. Place the reverse automatic document feeder in
position.
A01HIXC003DB
6. Using two mounting screws furnished with the
reverse automatic document feeder, tighten the
hinges to secure the reverse automatic document
feeder in position.
Note:
Tighten the mounting screws in order of
A0HUIXC003DA
3. Remove the protective tape and shipping preser-
vatives and remove the protective vinyl bag of the
hookup cord.
,
.
➀
➁
➀
➁
A01HIXC004DB
7. Connect the hookup code to the machine.
A0HUIXC011DA
4. Screw two shoulder screws furnished with the
reverse automatic document feeder into the holes
in the rear (two shoulder screws).
A0HUIXC005DA
A01HIXC044DA
E-2
III. Adjusting the height
1. Check the clearance between the upper face of
scanner and the protrusion on the reverse auto-
matic document feeder side (2 spots, front/back).
* There must be no clearance between the protru-
sion on the reverse automatic document feeder
and the upper face of scanner.
8. Affix the label A to the position shown below.
Label A
A0HUIXC006DA
9. Remove the indicated label from the reverse
automatic document feeder.
OK
NG
A01HIXC007DB
Protrusion
Protrusion
Label
A01HIXC047DA
A01HIXC008DA
E-3
IV. Adjusting skew feed
1. Close the reverse automatic document feeder.
2. Plug the power cord into the power outlet and
turn on the machine.
3. Check how the edges of the chart are misaligned.
The amount of the deviation of the chart will be X.
2. If there is any clearance, adjust the height by
turning the adjustment screw on the right side
viewed from the back.
Clockwise: The rear side will move up.
Counterclockwise: The rear side will move down.
• If further adjustment is required, adjust the height
by using the adjustment screw on the left side
viewed from the back together.
Clockwise: The rear side will move up.
Counterclockwise: The rear side will move down.
X
X
Deviation in + (plus)
Deviation in - (minus)
9J07IXC043DA
4. Place the chart in the document feeding tray (with
the side having an arrow facing up).
A0HUIXC008DA
3. Affix the labels B to the position shown below.
A01HIXC011DC
5. Make copies 5 times repeatedly in single side
mode.
6. Fold all 5 sample copies as illustrated and check
for any deviation.
Deviation on the sample will be Y.
A0HUIXC009DA
Y
Y
Deviation in + (plus)
Deviation in - (minus)
9J07IXC043DA
E-4
7. Obtain the difference between the deviation of
the chart and the deviation of the sample.
Difference of the deviation = Y - X
Specifications: 0 ± 2 mm
* If the difference of the deviation does not fall
within the specified range, perform the following
adjustment.
8. Loosen the mounting screw on the right hinge
viewed from the front.
9. When the difference of the deviation is + (plus),
turn the screw counterclockwise to adjust.
Note:
• When turning the screw, be sure not to raise the
reverse automatic document feeder until in an
upright position.
• When the adjusting plate is set far left, do not
tighten any further.
* To prevent the adjustment screw breakage, be
sure to follow the above instructions.
10. When the difference of the deviation is - (minus),
turn the screw clockwise to adjust.
Note:
When turning the screw, be sure not to raise the
reverse automatic document feeder until in an
upright position.
*
To prevent the adjustment screw breakage, be
sure to follow the above instructions.
Mounting
screw
A01HIXC014DB
11. After the adjustment is completed, tighten the
mounting screws on right side hinge securely
with screwdriver.
Mounting
screw
A01HIXC012DA
Adjusting plate
A01HIXC013DA
E-5
Plik z chomika:
ramirez_pl
Inne pliki z tego folderu:
au-101_im_A09M-9557-00E.pdf
(362 KB)
au-102_im_A0X9-9557-00E.pdf
(359 KB)
au-201_im_A09N-9557-00E.pdf
(431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf
(1623 KB)
df-617_im_A0HU-9560-00E.pdf
(581 KB)
Inne foldery tego chomika:
firmware c280
User Guides
Zgłoś jeśli
naruszono regulamin