js-603_A10F-9550-00E.pdf

(716 KB) Pobierz

JS-603 Job Separator

INSTALLATION MANUAL

Applied Machine: FS-527

I. Accessory parts

II. Installation procedures

Note:

When mounting the job separator, mount it before

mounting the finisher to the machine.

1. Turn off the machine and unplug the power cord

from the power outlet.

2. Remove the job separator and all other accesso-

ries from the shipping carton and remove the pro-

tective tape.

No.

Name

Shape

Q’ty

1.

Job separator

1

A10FIXC001DA

2.

Screw

(3 × 8 mm)

1

9738

3.

Installation

manual

1

set

4980IXC019DA

A10FIXC002DA

After unpacking, be sure to get rid of the

packaging materials and keep them out of

the reach of children.

Putting the head in the plastic bag

involves danger of suffocation.

3. When the machine has the optional finisher and

horizontal transport unit installed, remove them.

Note:

For the finisher removal procedure, see installa-

tion manual for finisher.

4. Remove the cover from the horizontal transport

unit as shown in the illustration (one screw).

Note:

This manual provides the illustrations of the acces-

sory parts and machine that may be slightly differ-

ent in shape from yours. In that case, instead of

the illustrations, use the appearance of your

machine to follow the installation procedure. This

does not cause any significant change or problem

with the procedure.

A10FIXC003DA

A10F-9550-00

E-1

999261867.050.png

999261867.061.png

999261867.072.png

999261867.080.png

999261867.001.png

999261867.002.png

999261867.003.png

999261867.004.png

999261867.005.png

999261867.006.png

999261867.007.png

999261867.008.png

999261867.009.png

999261867.010.png

999261867.011.png

999261867.012.png

999261867.013.png

999261867.014.png

999261867.015.png

999261867.016.png

999261867.017.png

999261867.018.png

999261867.019.png

999261867.020.png

999261867.021.png

999261867.022.png

999261867.023.png

999261867.024.png

999261867.025.png

999261867.026.png

999261867.027.png

999261867.028.png

999261867.029.png

999261867.030.png

999261867.031.png

999261867.032.png

999261867.033.png

999261867.034.png

999261867.035.png

5. Cut the end of the knockout at the two places with

nippers to remove the knockout from the cover

removed in step 4.

8. Connect the job separator connector to the hori-

zontal transport unit.

A10FIXC004DA

6. Remove the cover from the horizontal transport

unit as shown in the illustration (three screws).

Note:

The screws removed in this step are used in later

step.

A10FIXC007DA

9. Attach the cover removed in step 4 (one screw).

10. Mount the finisher to the machine.

Note:

For the finisher mounting procedures, see installa-

tion manual for finisher.

11. Plug the power cord into the power outlet and

turn on the machine.

A10FIXC005DA

7. Install the job separator (three screws removed in

step 6 and one furnished screw).

A10FIXC006DA

E-2

999261867.036.png

999261867.037.png

999261867.038.png

999261867.039.png

999261867.040.png

999261867.041.png

999261867.042.png

999261867.043.png

999261867.044.png

999261867.045.png

999261867.046.png

999261867.047.png

999261867.048.png

999261867.049.png

999261867.051.png

999261867.052.png

999261867.053.png

999261867.054.png

999261867.055.png

999261867.056.png

999261867.057.png

999261867.058.png

999261867.059.png

999261867.060.png

999261867.062.png

999261867.063.png

999261867.064.png

999261867.065.png

999261867.066.png

999261867.067.png

999261867.068.png

999261867.069.png

999261867.070.png

999261867.071.png

999261867.073.png

999261867.074.png

999261867.075.png

999261867.076.png

999261867.077.png

999261867.078.png

999261867.079.png

Plik z chomika:

Inne pliki z tego folderu:

au-101_im_A09M-9557-00E.pdf (362 KB)
au-102_im_A0X9-9557-00E.pdf (359 KB)
au-201_im_A09N-9557-00E.pdf (431 KB)
bizhub_c360_c280_c220_im_A0ED-9602-11E.pdf (1623 KB)
df-617_im_A0HU-9560-00E.pdf (581 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin