SMChapter5parts.pdf

5 Parts-list

Introduction......................................................................................................................

5-3

Duplex 1

PL 13.1 Duplex (1 of 2) ...................................................................................................

5-21

Covers (1 of 3)

PL 1.1 Covers (1 of 3) .....................................................................................................

5-4

Duplex 2

PL 13.2 Duplex (2 of 2) ...................................................................................................

5-22

Covers (2 of 3)

PL 1.2 Covers (2 of 3) .....................................................................................................

5-5

Offset Catch Tray 1

PL 14.1 Offset Catch Tray (1 of 2) ..................................................................................

5-23

Covers (3 of 3)

PL 1.3 Covers (3 of 3) Options........................................................................................

5-6

Offset Catch Tray 2

PL 14.2 Offset Catch Tray (2 of 2) ..................................................................................

5-24

Paper Cassette 1

PL 2.1 Tray 1 (1 of 2) ......................................................................................................

5-7

Paper Cassette 2

PL 2.2 Tray 1 (2 of 2) ......................................................................................................

5-8

Paper Feeder

PL 3.1 Paper Feeder .......................................................................................................

5-9

MBF Chute

PL 4.1 MBF Chute...........................................................................................................

5-10

Paper Transport

PL 5.1 Paper Handler Assembly .....................................................................................

5-11

Chute Transport & Fuser

PL 6.1 Chute Transport & Fuser .....................................................................................

5-12

Exit

PL 7.1 Exit .......................................................................................................................

5-13

Drive & Xerographics

PL 8.1 Drive & Xerographics ...........................................................................................

5-14

Frame & Size Sensor

PL 9.1 Frame & Size Sensor...........................................................................................

5-15

Electrical

PL 10.1 Electrical ............................................................................................................

5-16

Optional Feeder 1

PL 11.1 500 Sheet Feeder (1 of 2)..................................................................................

5-17

Optional Feeder 2

PL 11.2 500 Sheet Feeder (2 of 2)..................................................................................

5-18

Envelope Feeder 1

PL 12.1 Envelope Feeder (1 of 2) ...................................................................................

5-19

Envelope Feeder 2

PL 12.2 Envelope Feeder (2 of 2) ...................................................................................

5-20

Initial Issue

Parts-list

02/2000

5-1

DocuPrint N2125

Parts-list

Initial Issue

02/2000

5-2

DocuPrint N2125

Introduction

Overview

The Parts List section provides exploded view illustrations of

all spared subsystem components and a listing of the

corresponding part numbers. The illustrations show the

relationships between parts.

XE ------ European Parts Distribution System

AO ------ South America Parts Distribution System

XCL ------ Canada Parts Distribution System

P/J ------ Plug/Jack

Organization of this Section

The following elements make up the Parts List section:

P/O ------ Part of

W/ ------ With

Parts Lists (PL)

W/O ------ Without

Each item number in the part numbers listing corresponds to

an item number in the illustration. All the parts in a given

subsystem of the machine will be located in the same

illustration or in a series of associated illustrations. The parts

which are not spared are indicated by “- -” in the Part column.

Ta g

A Tag is used when a part or area of the system has been modified. The Change Tag Index, which is found in the General

Procedures/Information Section, lists the name and purpose of the Tag. In some cases, you will go to the parts lists and find a

part number listed as “with Tag.” Go to the Change Tag Index for a description of what the Tag is and what you need to install the

Tag. The Change Tag Index will either list a kit number or indicate “piece part.” If “piece part” is indicated, the parts lists

reference(s) will be given and all parts associated with the Tag will have to be individually located, ordered, and installed.

Exploded View Illustrations

An item that is called out on an illustration has a

corresponding listing within this section.

The notation “P/O Tag” after a part number indicates that the item is part of a Tag. The notation “Tag” after a part number will be

used only to indicate the entire Tag, whether that is a kit number or an individual part.

Components are given item numbers that correspond to the

part number listings.

Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the appropriate number on the Tag matrix.

Using the Parts List

Hardware items are lettered. All hardware dimensions are in

millimeters unless otherwise noted.

The numbers shown in each illustration correspond to the parts list number for that illustration.

Throughout this manual, parts are identified by the prefix “PL”, followed by a number, a decimal point, and another number.

For example, PL3.1.12 means the part is item 12 of parts list 3.1.

Assemblies and kits are a combination of several separate

components. A bracket is used on the illustration when an

assembly or kit is spared but is not shown. The item number

of the assembly or kit precedes the bracket; the item numbers

of the piece parts follow it.

The capital letters “C”, “E”, and “S” shown in an illustration stand for C-ring, E-ring, and Screw, respectively.

A shaded triangle t in an illustration indicates the item is part of an assembly.

The notation “with X~Y” following an part name indicates an assembly that is made up of components X through Y. For

example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and part 4.

Part Number Index

The notation "RS" means that the part is a requested spare. Part numbers for these parts will be provided as soon as they

are available.

This index lists all the spared parts in the system in numerical

order. Each number is followed by a reference to the parts list

on which the part may be found.

An asterisk * following a part name indicates the page contains a note about this part.

The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that connector jack 1 is attached to one end of the

wire harness and connector jack 2 is attached to the other end that is plugged into plug 2.

A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line item 1).

Other Information

Abbreviations

Abbreviations which may be used in the parts lists text or

illustrations are as follows:

US ------ United States Parts Distribution System

Initial Issue

Parts-list

02/2000

5-3

Introduction

DocuPrint N2125

PL 1.1 Covers (1 of 3)

Item

Part

Description

48E64591

Left Cover

802K11330

Left Interface Cover

48E64642

Option Cover

48K76454

Top Cover Assembly

802K09700

Control Panel Assembly (with 6)

162K55281

Control Panel Harness Assembly

48E64612

Right Cover

802K10800

Front Cover Assembly (with 10-13,

15-17, 20, 22)

Front Cover

- - - - -

Left Latch Assembly

- - - - -

Lever

- - - - -

Right Latch Assembly

3E48991

Stopper Cover

- - - - -

Envelope Chute

3E43880

Tray Stopper

50K39130

MBF Tray Assembly

48E64624

Left Front Cover

- - - - -

MBF Chute

891E95830

Control Panel Overlay (English

110V)

892E03010

Control Panel Overlay (Symbols

220V)

892E15040

Control Panel Overlay (Spanish)

892E15050

Control Panel Overlay (Portuguese)

892E15020

Control Panel Overlay (French

Canadian)

892E08500

Xerox Logo Badge

600K79660

Hardware Kit (Includes Screw)

Initial Issue

Parts-list

02/2000

5-4

PL 1.1

DocuPrint N2125

PL 1.2 Covers (2 of 3)

Item

Part

Description

- - - - -

Latch Spring

- - - - -

Left Latch

- - - - -

Right Latch

- - - - -

Latch Cover

- - - - -

Rear Cover

- - - - -

Direction Arm

600K79530

Cap Kit (quantity 2)

54K14991

Face Up Chute Assembly

- - - - -

Right Pivot Stopper

3E46120

Stopper

- - - - -

Duplex Guide Rail-Left

- - - - -

Duplex Guide Rail-Right

802K10010

Rear Cover Assembly (with 1-9)

600K79660

Hardware Kit (Includes Screw)

Initial Issue

Parts-list

02/2000

5-5

PL 1.2

DocuPrint N2125

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: