zbiornik i rakiety boczne instrukcja budowy.pdf

(1075 KB) Pobierz
C:\Documents and Settings\Owner\My Documents\Space files\Temporary\websitestuff\144stsmodel\photos\etsrbassembly.prn.pdf
1:144 External Tank / SRB’s Assembly
You need: White glue, a craft knife, ruler, tweezers, a cutting mat, and very,
very important……..PATIENCE.
For beginners is best to learn basic techniques for papermodeling. You can
check in the Internet.
The following pages show a sequence of photos as a guide to build this
model.
312573116.020.png 312573116.021.png
Glue the “reinforcers” parts on the back of this page.
These parts need to be at a same
distance one another and leaving a
small clearance at the top and
bottom of the page, about half an
inch (15 mm or so)
Give shape to the page, make a tube and insert circles “C” on both ends
leaving a clearance of about half an inch, too.
312573116.022.png 312573116.023.png 312573116.001.png 312573116.002.png 312573116.003.png 312573116.004.png
Glue part B1 at the bottom of ET.
Glue the “intertank” part starting at the right side of the page. Match it with
this line.
This is how the ET bottom looks at this point. Notice the silver detail
protruding from the rest. Do not put glue yet on that part.
312573116.005.png 312573116.006.png 312573116.007.png 312573116.008.png 312573116.009.png 312573116.010.png
Start building the Ojive or the upper portion of the External Tank.
The rings go one on top of the other, carefully matching one another.
Start from the base ring.
IMPORTANT: All rings are to be
aligned with their lines of
connection.
Match the Ojive line with this part.
312573116.011.png 312573116.012.png 312573116.013.png 312573116.014.png
Now build the bottom of the ET.
Start with this ring. Notice that B1
teeth will not be covered by first
ring.
The circles with the dots are a detail
from mission STS-1.
Not seen on current ET’s.
Finally put the last part aligned with
the center of the whole tube.
Now start the attachment structure.
Has one part that is glued on the
back of the other one.
312573116.015.png 312573116.016.png 312573116.017.png 312573116.018.png 312573116.019.png
Zgłoś jeśli naruszono regulamin