remote 1.pdf

Remote Starter

Installation & Operating Instructions

Espar

Remote Starter Kit 12 Volt: P/N 20 2900 70 01 50

Remote Starter Kit 12 Volt: P/N 20 2900 70 01 56

Espar Products, Inc.

6099AVipond Drive

Mississauga, Ontario

Canada L5T 2B2

(905) 670-0960 Canada

(905) 670-0728 Fax

(800) 387-4800 Canada & U.S.A.

www.espar.com

A member of the Worldwide

Eberspächer Group of Companies

Installation Instructions

Operating Instructions

The remote starter has been introduced

to offer a simple and convenient way to

turn on the heater system within 300

feet of the heater. This remote starter

can be connected to the existing

harness of the of the 7 day timer or to

the timer directly. See schematics on

inside page.

7 Day Timer

Either the “A” or “B” button will turn the heater on and/or off.

Note: After turning the heater on via remote starter, you may,

at anytime turn the heater off with the off button on

the 7 day timer.

Receiver

P/N 5670035

1 Mount the receiver in a suitable place

under the dash near the operating

switch of the heater.

P/N 5670036

Control transmitter

2 Run and secure the antenna as high

in the vehicle as possible, keeping it

away from metal surfaces.

A B

3 Connect the harness to the receiver

and connect the other end to the

operating switch harness of the heater.

See schematics on inside page.

Schematics

7 Day Timer

Use remote Starter Kit 12 Volt: P/N 20 2900 70 01 50

Terminal

MINI.FE,AWG14-18

Espar Part Number

5670226

Espar

R964

RECEIVER

Red

Pin 11 on Timer

Green / Black

Pin 7 on Timer

Espar Part Number

5670035

Yellow / Black

Black

Pin 12 on 7 day Timer

ANTENNA

For best range, uncoil and

place as high in vehicle as

possible and away from metal

surfaces as much as possible.

7 day timer

P/N: 22 1000 30 36 00 (coolant)

P/N: 22 1000 30 40 00 (air)

Warning:

Disconnect heater’s harness, from battery

prior to making electrical connections

Remote A - green wire pin 7 on timer

Remote B - yellow wire

Power - red wire pin 11 on timer

Ground - black wire pin 4 or pin 12 on timer

Programmable Timer, Mini Timer, Thermostat & Rheostat

Use remote Starter Kit 12 Volt: P/N 20 2900 70 01 56

Heater Harness

Red

Green / Black

Green

Mini

Timer

Yellow

Receiver

Yellow / Black

Yellow

Black / Brown

Brown

1. Remove fuses on heater’s harness or disconnect from battery.

2. Connect four wires between relay and receiver as shown.

3. Connect tree wires from relay to harness:

• Red wire to fused red wire on heater’s harness going to control device.

• Brown wire to negative wire on heater’s harness (do not ground to chassis if vehicle has switch on battery “-”)

• Yellow wire of relay to yellow wire on heater’s harness.

3. Replace fuses.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: