6.5 TM200 - ZD.pdf

(418 KB) Pobierz
THERMOSTATIC MIXING VALVE
TM200- 3 / 4 ZD
FEATURES
Fast, sensitive integral sensor.
WRc approved materials.
Locking cap prevents accidental
adjustment.
Clear window on locking cap for visual
display of set point.
Can be installed in any orientation.
DZR brass body.
Flange connection enables simple
maintenance.
APPLICATION
The TM200 failsafe thermostatic mixing valve provides safe hot
water control and automatically shuts off the hot water if the cold
supply fails for any reason. Supplied with a locking cap and
finished in brass, the valve is primarily for use by original
equipment manufacturers. The TM200 may also be used on
thermal store cylinders or underfloor heating systems. To provide
flexibility, the connections are supplied separately so those most
appropriate to the application can be chosen.
OPTION
Service kit.
6.5
922680674.020.png 922680674.021.png 922680674.022.png 922680674.023.png 922680674.001.png 922680674.002.png 922680674.003.png 922680674.004.png 922680674.005.png 922680674.006.png 922680674.007.png
THERMOSTATIC MIXING VALVE
TM200- 3 / 4 ZD
Specification
Max. working pressure : 10 bar
Max. hot inlet temperature : 90˚C
Maximum supply pressure to both hot
and cold inlet must be within the
following range but not exceed the
differential pressure stated below.
High pressure systems : 0.5 - 5.0 bar
Low pressure systems : 0.1 - 1.0 bar
Maximum differential pressure
between hot and cold should not
exceed the following.
High pressure systems
Flow Rate Chart
: 2.0P
High pressure systems
: 0.4P
Mixed temperature
setting range : 30˚C - 60˚C
Minimum temperature between
hot supply and mix to ensure fail-safe
requirement
Dimensions (mm)
: 10˚C
Valve body material
: DZR brass
Pressures
It is preferable for the TM200 to be
installed with balanced dynamic
pressure. However, control will also
remain within the specified limits
when supply pressures are different
provided that under flow conditions
the pressure differential between
supplies is within the stated
specification.
A
B
C
D
1 ” BSP
96
40
66
Typical Applications
Ordering Specification
TM200 - 3 / 4 ZD
Failsafe thermostatic mixing valve
without connection parts.
TM200 - 3 / 4 ZG
Failsafe thermostatic mixing valve with
three 22mm solder tailpieces. Flanged
connection nuts and washers.
TM200A - 30/60
Service kit including thermostatic
actuator insert.
2019300
22mm solder tailpiece.
2609100
Flange connection nut (x1).
2913800
15mm solder tailpiece.
2915300
3
/ 4 ” BSP male threaded flange tailpiece.
5017500
Flange gasket (x1).
922680674.008.png 922680674.009.png 922680674.010.png 922680674.011.png 922680674.012.png 922680674.013.png 922680674.014.png 922680674.015.png 922680674.016.png 922680674.017.png 922680674.018.png 922680674.019.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin