G_3.pdf

(149 KB) Pobierz
3-1
DRIVE-CONTROL
COMPONENTS
CONTENTS
FRONT SUSPENSION
. . . . . . . . . . . . . . . . . . .
2
WHEEL AND TIRES
. . . . . . . . . . . . . . . . . . . . .
4
REAR SUSPENSION
. . . . . . . . . . . . . . . . . . . . .
3
SERVICE BRAKES
. . . . . . . . . . . . . . . . . . . . . .
5
897039642.008.png 897039642.009.png 897039642.010.png
3-2
DRIVE-CONTROL COMPONENTS – Front Suspension
FRONT SUSPENSION
The front suspension has been revised as follows:
In order to enhance the driving stability, the front roll center has been lowered by changing the installation
method of the ball joint between the knuckle and the lower arm.
The knuckle has been replaced by one manufactured by forging. It has also been revised in shape
because of the change in the ball joint.
<EVOLUTION-VI>
Knuckle
Ball joint
<Base vehicle (EVOLUTION-V)>
Knuckle
Ball joint
897039642.011.png 897039642.001.png
3-3
DRIVE-CONTROL COMPONENTS – Rear Suspension
REAR SUSPENSION
The rear suspension has been revised as follows:
The lower arms, trailing arms and toe control arms have been replaced by aluminum forged ones
for lighter weight.
In order to improve the drive stability, the bushing of the lower arm-to-crossmember joint has been
replaced by one of pillow ball type.
The shock absorber stroke (tire stroke) has been increased.
Shock absorber (stroke increased)
Toe control arm
( aluminum forged )
Trailing arm
(aluminum forged)
Knuckle side
Crossmember side
Lower arm (aluminum forged)
A
A
Section A–A
Shock absorber
connection
<Base vehicle (EVOLUTION-V)>
<EVOLUTION-VI>
Rubber bushing
Pillow ball bushing
897039642.002.png 897039642.003.png 897039642.004.png 897039642.005.png
3-4
DRIVE-CONTROL COMPONENTS – Wheels and Tires
WHEELS AND TIRES
The newly designed 17-inch aluminum wheel is the standard wheel for GSR. It is also available for RS
as a maker-option.
<EVOLUTION-VI>
<Base vehicle (EVOLUTION-V)>
897039642.006.png
3-5
DRIVE-CONTROL COMPONENTS – Service Brakes
SERVICE BRAKES
The Brembo front and rear brakes have been revised as follows:
The clips for securing the pins have been eliminated.
With elimination of the clips, each pin had a bushing added and the clip mounting hole eliminated.
Two shims have been added.
<Front>
Clip eliminated
Clip mounting
hole eliminated
Bushing added
Shim added
Clip eliminated
Shim added
<Rear>
Shim added
Shim added
Clip eliminated
Clip mounting
hole eliminated
Bushing added
897039642.007.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin