VOS6002GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

VOLVO

S 60

YEAR 02 ﬁ

PETROL

DIESEL

MAKE

MOD.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the wheel house, passenger’s side. Pass

the cables using the original core hitch located under the driver’s side wheel house.

The modular systems and the modules should be positioned under the dashboard.

CENTRAL UNIT POSITION

POWER SUPPLY

+30: connect to the 4 mm 2 RED/WHITE wire located in the wiring harness coming out of

the multiway connector at the entrance of the fuse box.

- 31: connect to one of the cable terminals coming out of the original power supply behind

the left lateral panel, driver’s side.

IGNITION WIRE

+ 15/54: connect to the BLUE/RED wire located in the wiring harness coming out of the

connector fixed to the central placed, in vertical way, under the driver’s side dashboard.

DIRECTION INDICATORS

Connect to the GREEN wire, at the position marked ‘SH1’ and to the GREEN/WHITE wire,

at the position marked ‘SH2’, behind the central placed, in vertical way, under the driver’s

side dashboard.

ELECTRIC WINDOWS

Positive control signal

Front window, drivers side:

cut the VIOLET wire, at the position nr.4, in the grey connector coming out of the driver’s

side push buttons panel.

Front window, passengers side:

cut the VIOLET wire, at the position nr.4, in the grey connector coming out of the

passenger’s side push buttons panel.

Rear window, drivers side:

cut the GREEN/BROWN wire, at the position ‘M11’ of the central placed, in vertical way,

under the dashboard, driver’s side.

Rear window, passengers side:

cut the GREEN/BROWN wire, at the position ‘M124’ of the central plased, in vertical way,

under the dashboard, driver’s side.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the VIOLET/WHITE wire at the position nr.13 (lock) and to the BLUE/WHITE

wire at the position nr.12 (unlock) located in the 30 way green connector coming out of the

windows push buttons panel directly inside the driver’s side door.

IMMOBILISATION POINT

Fuel pump

Cut the LIGHT BLUE wire, at the position ‘MI/12’, behind the central placed, in vertical

way, under the driver’s side dashboard.

STARTER

+ 50: cut the GREEN wire located in the wiring harness coming out of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the WHITE wire located in the wiring harness coming out of the lamp placed

near the driver’s side foot rest.

Note: The lamp control is at positive polarity.

BOOT SWITCH

Connect to the WHITE wire located in the wiring harness coming out of the lamp placed in

the boot.

Note: The lamp control is at positive polarity.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

vos6002gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: