First Steps with STEP 7.pdf

First Steps with STEP 7 Lite V3.0

SIMATIC

STEP 7 Lite V3.0

Edition 04/2004

simatic

Erstellen Sie

ein

Programm im

OB1

SIMATIC Software

First Steps with STEP 7 Lite V3.0

Getting Started

04/2004

A5E00293886-01

Introduction

Safety Guidelines

This manual contains notices intended to ensure personal safety, as well as to protect the products and connected

equipment against damage. These notices are highlighted by the symbols shown below and graded according to

severity by the following texts:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions are not

taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precautions are not

taken.

Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a particular part of

the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as

persons who are authorized to commission, to ground and to tag circuits, equipment, and systems in accordance with

established safety practices and standards.

Correct Usage

Note the following:

0.2

Warning

This device and its components may only be used for the applications described in the catalog or the technical des-

cription, and only in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and

operated and maintained as recommended.

Trademarks

SIMATIC®, SIMATIC HMI® and SIMATIC NET® are registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks might infringe

upon the rights of the trademark owners.

Disclaimer of Liability

The reproduction, transmission or use of this

document or its contents is not permitted without express

written authority. Offenders will be liable for damages. All

rights, including rights created by patent grant or

registration of a utility model or design, are reserved.

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreement. However, the

data in this manual are reviewed regularly and any necessary

corrections included in subsequent editions. Suggestions for

improvement are welcomed.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D- 90327 Nuernberg

______________________________________________________

Siemens Aktiengesellschaft

©Siemens AG 2004

Technical data subject to change.

______________________________________________________

A5E00293886

Getting Started STEP 7 Lite A5E00293886-01

0.2

Welcome to STEP 7 Lite

... the SIMATIC software for generating PLC programs in LAD, FBD or STL for SIMATIC S7-300 (including

SIMATIC C7), ET 200S and ET 200X. STEP 7 Lite is designed for the newcomer to SIMATIC as well as for

the user editing projects offline.

You will need basic STEP 7 software or STEP 7 Professional if you want to implement a SIMATIC S7-400

PLC, distributed I/O, CP communication modules, FM function modules, or systems consisting of more than

one CPU.

Information on STEP 7 Lite

STEP 7 Lite is a software not only designed for newcomers, but also for the expert who primarily programs

medium performance systems. With STEP 7, programs created in STEP 7 Lite can be imported/exported for

further use. Compared to STEP 7, we went new ways in designing the user interface. Enhanced Explorer

functions, transparent project overviews and the usual Windows operating philosophy, all of which will offer

optimal support to you for getting started and working with our SIMATIC Software.

Information on this Getting Started

Here you will get to know the basics of STEP 7 Lite. We shall guide you through practical exercises introdu-

cing you to essential on-screen dialogs and operating procedures, prepared in such a way that you can start

at almost any chapter. Descriptions and operating procedures you should refer or which you must follow are

highlighted in red color. Brief excursions to associated topics are referenced in blue color.

0.3

Prerequisites for working with this Getting Started

What you need to work through the practical STEP 7 Lite exercises in this Getting Started:

• a SIMATIC PG or a PC,

• the STEP 7 Lite software package and the authorization disk,

• a SIMATIC S7-300 PLC.

Please note the Order No. table in Chapter 1.

Further Documentation

• After installation of STEP 7 Lite, select Start > Simatic > Documentation on your CD to open and print

the electronic manual "Programming with STEP 7 Lite".

Have lots of fun and success!

SIEMENS AG

Getting Started STEP 7 Lite A5E00293886-01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: