0420A.pdf

420A

Service 0422

January 1997

77 11 192 478

TECHNICAL NOTE

Edition Anglaise

S/ Section

Type

RENAULT

All Types

XXX X

SOUNDPROOFING PADS FITTED TO THE BODYWORK LINING

When replacing a body supplied from the Parts Department it is essential to fit all the adhesive foam

soundproofing pads on the pillar lining, the body sides, quarter panels, roof panel cross members, bulkhead,

etc, before fitting the trim in the passenger compartment...

If this recommendation is not followed, this can cause aggravating noises in the vehicle passenger

compartment.

The following products, available from the Parts Department, must be used :

Type of pad selected is up to the user.

Kit of pre-cut adhesive foam pads

Part No : 77 01 465 051

Adhesive foam sheet to be cut as required

Part No : 77 01 040 765

Use the old body as a reference point for the location and dimension of each foam pad.

PRF4002

PRF4001

Kit of pre-cut adhesive foam pads

Sheet of adhesive soundproofing foam to be cut

as required

A4 foam pads 20x10 mm

B6 foam pads 50x20 mm

C4 foam pads 60x50 mm

D4 foam pads 70x35 mm

E4 foam pads 120x80 mm

F4 foam pads 200x80 mm

G1 roll of foam ( length 1 metre).

H3 mm

240 mm

580 mm

The repair methods given by the manufacturer in this document are based on the

technical specifications current when it was prepared.

The methods may be modified as a result of changes by the manufacturer in the

production of the various component units and accessories from which his vehicles

are constructed".

All copyrights reserved by Renault S.A.

Copying or translating, in part or in full, of this document or use of the service part

reference numbering system is forbidden without the prior written authority of the

Régie Nationale des Usines Renault S.A.

Renault 1997

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: