RENAULT VEL SATIS 02 BT.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE RENAULT

MOD. VEL SATIS* YEAR. 02 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the driver’s side wheelhouse, on

the left of the boot.

CENTRAL UNIT POSITION

Position the modular systems and the modules in the above mentioned space.

POWER SUPPLY

+30: Connect to the 1 mm 2 RED wire, at the position nr.5 of the 6 way black

connector located behind the driver’s side covering, in the boot.

-31: Connect with a terminal directly to an original ground terminal located in

the upper part of the prearrangement of the antitheft.

IGNITION WIRE

+15/54: Connect to the 1,5 mm 2 YELLOW wire, at the position nr.3 of the 6

way black connector located behind the driver’s side covering in the boot.

DIRECTION INDICATORS

Parking lights control

Connect to the wires: GREEN at the position nr.9 and BROWN at the position

nr.8 of the connector coming out of the UCH operating central located under

the driver’s side dashboard.

ELECTRIC WINDOWS

The control centrals of the windows motors do not allow the connection to

make the windows locking.

ACTIV./DEACTIVATION

CONTROLS

Connections antithefts/vehicle

Art.3800 Vehicle Position

GREY/BLACK ORANGE pos. nr. 4 grey comb of the white connector

YELLOW/BLACK ORANGE pos. nr. 5 grey comb of the white connector

VIOLET/WHITE ground car body

ORANGE BROWN pos. B1 original unlock/lock push button

VIOLET VIOLET pos. A3 original unlock/lock push button

ORANGE/WHITE positiva power supply in the fuse box

IMMOBILISATION POINT

Starting locking

Cut the ORANGE wire, at the position nr. 1, of the 4 way black connector

coming out of the starting push button, on the right of the steering wheel.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the WHITE wire, at the position nr. 2, of the connector coming out of

the boot lamp.

BOOT SWITCH

Connect to the PINK wire, at the position nr. 2, of the connector coming out of

the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

revel02gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: