8200ser.pdf

(4411 KB) Pobierz
8200FRUFinal
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
8200 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
TM
49472349.051.png 49472349.062.png 49472349.073.png 49472349.084.png 49472349.001.png 49472349.002.png 49472349.003.png 49472349.004.png 49472349.005.png 49472349.006.png 49472349.007.png 49472349.008.png 49472349.009.png 49472349.010.png 49472349.011.png 49472349.012.png 49472349.013.png 49472349.014.png 49472349.015.png 49472349.016.png 49472349.017.png 49472349.018.png 49472349.019.png 49472349.020.png 49472349.021.png 49472349.022.png 49472349.023.png 49472349.024.png 49472349.025.png 49472349.026.png 49472349.027.png 49472349.028.png 49472349.029.png 49472349.030.png 49472349.031.png 49472349.032.png 49472349.033.png 49472349.034.png 49472349.035.png 49472349.036.png 49472349.037.png 49472349.038.png 49472349.039.png 49472349.040.png 49472349.041.png 49472349.042.png 49472349.043.png 49472349.044.png 49472349.045.png 49472349.046.png 49472349.047.png 49472349.048.png 49472349.049.png 49472349.050.png 49472349.052.png 49472349.053.png 49472349.054.png 49472349.055.png 49472349.056.png 49472349.057.png 49472349.058.png 49472349.059.png 49472349.060.png 49472349.061.png 49472349.063.png 49472349.064.png 49472349.065.png 49472349.066.png 49472349.067.png 49472349.068.png 49472349.069.png 49472349.070.png 49472349.071.png 49472349.072.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
8200 Series
TOSHIBA
Tough Enough for Today’s World.
TM
49472349.074.png 49472349.075.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
8200 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
Pack
PC card
Release
lever
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Slide the battery assembly forward and out of the
battery bay.
1. Pull out the eject button of the PC card to be
removed.
2. Press firmly to eject the PC card .
3. Grasp the PC card and remove it.
NOTE: Before removing any PCMCIA device, make
sure it is “STOPPED” in the PC Card Manager.
SELECT BAY REMOVAL
DVD-ROM/CD-RW DRIVE DISASSEMBLY
Release
lever
Select bay
device
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
arrow.
Selectable bay cover
CD-ROM
1. Remove the selectable bay cover .
TOSHIBA
Tough Enough for Today’s World.
49472349.076.png 49472349.077.png 49472349.078.png 49472349.079.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
8200 Series
DVD-ROM/CD-RW DRIVE DISASSEMBLY
FDD DISASSEMBLY
Connector cover
Plastic cover
M2x3 black
screws
M2x4
silver
screw
M2x4 black
screws
Spacer
M2x8 black
screws
Connector
M2x6 silver screw
Connector cover
1. Remove the following six screws from the Select bay
module:
- Four M2.5x4 black screws
- One M2x6 silver screw
- One M2x4 silver screw.
2. Remove the connector cover and the plastic cover..
2. Remove four M2x4 black screws
3. Remove the frame .
4. Remove two M2x8 silver screws .
5. Remove the spacer , connector , and the connector
cover from the CD/DVD ROM drive.
FDD DISASSEMBLY
FDD
FDD
FDD bracket
Connector Flexible cable
3. Remove the FDD from the FDD bracket .
4. Disconnect the connector flexible cable from the
FDD.
NOTE : The brackets, flexible cable and the screws
are separate parts.Please DO NOT return them
to TOSHIBA .
TOSHIBA
Tough Enough for Today’s World.
49472349.080.png 49472349.081.png 49472349.082.png 49472349.083.png 49472349.085.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
8200 Series
MEMORY MODULE REMOVAL
WIRELESS LAN REMOVAL
M2.5x4 black
flat head screws
Memory
cover
Memory
module
Memory clips
Mini PCI cover
M2.5x4 security torx screw
1. Turn the computer upside down.
2. Remove two M2.5x4 black flat head screws and
remove the memory cover .
3. Spread the memory clips outward and pull the memory
module out of the connector on a 45 degree angle.
1. Turn the computer upside down.
2. Remove two M2.5x4 security torx screws securing
the Wireless LAN cover and lift out the cover.
HDD REMOVAL
Mini-PCI
connector
clips
Wireless
LAN card
Black coax cable
White coax cable
HDD cover
M2.5x4 black
flat head screws
3. Disconnect the Black and White coax from PJ12 and
PJ13.
4. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screws
securing HDD cover
3. Push up the raised nubs to remove the HDD cover.
TOSHIBA
Tough Enough for Today’s World.
49472349.086.png 49472349.087.png 49472349.088.png 49472349.089.png 49472349.090.png 49472349.091.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin