NW41X5X.TXT

*****************************************************************************
*                                                                           *
*                  SURECOM EP-320X-R 100/10M PCI Adapter                    *
*                                                                           *
*           Installation guide for Novell Netware Server 4.1x/5.0           *
*                                                                           *
*****************************************************************************

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v4.1x/5.0
   server driver for SURECOM EP-320X-R 100/10M PCI Adapter.

   Location of Driver:     \NETWARE\EP320R.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v4.1x/5.0 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the EP-320X-R Driver Diskette into drive A and check the
         contents of subdirectory  A:\NETWARE , It should contain the
         following file :

         EP320R.LAN???  Novell NetWare V4.1x/5.0 Server Driver
         EP320R.LDI???  Novell NetWare V4.1x/5.0 Server Driver Installation
                        Information File

      2. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      3. Select "Driver Options" and press <Enter>.

      4. Select  "Configure Network Drivers"-> "Discover and Load Drivers"
         and press <Enter>.

      5. The EP320R.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      6. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.

      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver EP320R.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "MEDIUMTYPE" is provided for specifying adapter's speed
         ( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) , add MEDIUMTYPE in LOAD
         commands. For example:

         LOAD EP320R FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=100FULL
         BIND IPX TO LAN_A NET=11

------------------------------- End Of File ---------------------------------