OPAST98GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

OPEL

MOD. ASTRA

YEAR 98 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, behind the

headlamp on the driver’s side. Install the modular systems and the modules under

the dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the 4 mm 2 RED wire located in the wiring harness coming out of

the connector at the entrance of the fuse box.

- 31: connect with a cable terminal to the car body.

IGNITION WIRE

+ 15/54: connect to the 2,5 mm 2 BLACK wire in the wiring harness coming out of

the 80 way green connector (position nr. 77) located behind the left sill cover,

driver’s side

DIRECTION INDICATORS

Connect to the 0,75 mm 2 WHITE/BLACK and GREEN/BLACK wires located in the

wiring harness coming out of the 80 way green connector (positions nr. 65 and nr.

19), behind the left sill cover, driver’s side.

ELECTRIC WINDOWS

Comfort closing

The total closing of the windows is obtained timing the RED/BLUE wire (the same

of the doors).

CENTRAL DOORS LOCKING Negative control signal

Connect to the 0,75 mm 2 RED/WHITE wire (unlock) and to the RED/BLUE wire

(lock) located in the wiring harness of the 16 way black connector coming out of

the core hitch of the driver’s side door.

IMMOBILISATION POINT

Fuel pump

Cut the 1,5 mm 2 RED/BLUE wire located in the wiring harness coming out of the 80

way green connector (position nr. 1), behind the left sill cover, driver’s side.

STARTER

+50: Cut the 2,5 mm 2 BLACK/RED wire located in the wiring harness coming out of

the connector of the lights switch.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, above the left

lateral headlamp, driver’s side.

DOORS SWITCH

Connect to the 0,5 mm 2 GREY wire in the wiring harness coming out of the 80 way

green connector (position nr. 29) located behind the left sill cover, driver’s side.

BOOT SWITCH

Connect to the 0,5 mm 2 BROWN/WHITE wire located in the wiring harness coming

out of the bonnet lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

opast98gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: